This machine integrates box opening, material pushing, ear folding and box sealing. It is suitable for multi-variety and multi-specification paper box packaging machines. It is controlled by PLC microcomputer, with automatic alarm and fault prompt. It features human-machine interface control, simple operation and convenient maintenance. Its box sealing system is equipped with functions such as automatic box opening, material pushing, ear folding and box sealing, without the need for manual operation.
All parts of the entire machine that come into contact with the color box are made of high-quality stainless steel and aluminum materials. The surface has undergone polishing treatment, presenting a beautiful and elegant appearance without polluting the environment.
| Model | S-ZH20 |
| Adjustment range | (L)250-380mm, (W)250-380mm, (H)20-70mm |
| Paper requirements | Three-layer corrugated paper |
| Boxing speed | 20（boxes/min） |
| Voltage three phase | 220V |
| Machine power | 5.5KW |
The box rack is used for stacking paper boxes. It can hold 300 to 500 paper boxes at a time. When the paper boxes are used up, they need to be added manually. This paper box rack can be adjusted according to the size of the paper boxes. If the mechanism is not adjusted properly (including the guide rail of the paper box frame and the suction cup) and the indentation of the paper box is not deep enough, it will result in the box not being able to be opened. If the indentation is deep enough and the box still cannot be opened, we will add some spring plate devices, etc. according to the situation where the box cannot be opened at that time. Make the suction cup have more force when holding the paper box. The indentation on the paper box is generally more than 0.4MM deep, and the paper box needs to have a pre-folding effect.
The material conveyor belt is used for the placement of products. This conveyor belt can be adjusted according to the size of the products Loosen the two screws and move them alternately, and it's done Adjust the feeding grid. Two additional compartments are recommended There is a baffle on the side to prevent the product from being placed askew. Be ready to lose The conveyor belt can be placed by hand or used Machine placement. The machine can be placed with photoelectric positioning. Two machines edit the program to make the machine The movements are coordinated and consistent(It should be determined whether to place it by hand or by machine based on the characteristics of the product).
When it senses that there are products coming onto the feeding conveyor belt, the machine will automatically suck the boxes and push the materials, such as If no products come over, the machine will not suck up the boxes. If products are delivered and the machine has no paper boxes, it will stop, which serves a protective function. After the paper box is opened, it is conveyed to the feeding port through the paper box conveyor chain. There will be four baffles (top, bottom, left and right) to open the box, allowing the product to be smoothly pushed into the paper box. If the product cannot be pushed in, the machine will The automatic shutdown serves to protect the machine and the products. There should be a gap of 2-3MM between the product and the outer box (length/width/height) to prevent the outer box from being too small to be pushed in or damaging the paper box when pushing the material.
When the product is placed in the paper box, the machine automatically folds the ears on both sides, sprays glue and folds the pages (as shown in the picture). The position in this picture is the specific part for adjusting the length/width/height of the machine. The most difficult part to adjust is also in this picture. We can mark the positions that need to be adjusted according to the size of the paper box. The machine adjustment personnel only need to move the relevant parts to the marked positions according to the size of the paper box. If operated in this way, it will reduce the difficulty of machine adjustment for the machine adjustment personnel and the adjustment time for changing the specifications of the paper box.
FOSHAN SINCERE YUANBO MACHINERY CO., LTD
